Char Broil Big Easy Turkey Fryer Instructions

USER MANUAL

The Big Easy Oil-less Turkey Fryer

The Large Easy
Oil-less Turkey Fryer

Tools needed for assembly:
Screwdriver (not provided)

If you accept questions or need assistance during associates, please call 1-888-430-7870.

This educational activity manual contains important information necessary for the proper assembly and safe use of the appliance.

Read and follow all warnings and instructions before assembling and using the apparatus.

Follow all warnings and instructions when using the appliance.

PARTS DIAGRAM

PARTS DIAGRAM

Safety Symbols

The symbols and boxes shown below explain what each heading means. Read and follow all of the messages establish throughout the transmission.

DANGER: Indicates an imminently hazardous situation which, if non avoided, will result in decease or serious injury.

WARNING: Indicates a potentially chancy situation which, if not avoided, could consequence in death or serious injury.

CAUTION: Indicates a potentially hazardous state of affairs or dangerous practice which, if not avoided, may result in minor or moderate injury.

DANGER

  1. Never operate this appliance unattended.
  2. Never operate this appliance within 3ft (1m) of any structure, combustible fabric or other gas cylinder.
  3. Never operate this appliance within 25 ft (7.5 m) of whatever flammable liquid.
  4. If a fire should occur, keep away from the apparatus and immediately call your fire department.

Failure to follow these instructions could result in fire, explosion or burn chance, which could crusade property harm, personal injury or death.

DANGER

If yous aroma gas:

  1. Shut off gas to the appliance.
  2. Extinguish any open flame.
  3. Open chapeau.
  4. If scent continues, proceed abroad from the appliance and immediately call your fire section.

Failure to follow these instructions could event in  fire or explosion, which could cause property impairment, personal injury or death.

Warning

Do not attempt to repair or alter the hose/valve/regulator for any "assumed" defect. Whatever modification to this assembly will void your warranty and create the gamble of a gas leak and fire. Use merely authorized replacement parts supplied by manufacturer.

Caution

For residential use only. Do not employ for commercial cooking.

Installation Safety Precautions

  • • Utilise your appliance, as purchased, only with LP (propane) gas and the regulator/valve assembly supplied.
  • The appliance installation must suit with local codes, or in their absence of local codes, with either the National Fuel Gas Lawmaking, ANSI Z223.1/ NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, and Propane Storage and Handling, CSA B149.2, Canadian Electrical Code, CSA C22.i or the Standard for Recreational Vehicles, ANSI
    A 119.2/NFPA 1192, and CSA Z240 RV Series, Recreational Vehicle Code, every bit applicative.
  • This appliance is not for use in or on recreational vehicles and/or boats.
  • This apparatus is rubber certified for apply in the United States and/or Canada simply. Do not modify for utilise in whatever other location. Modification will consequence in a safety gamble.

Alarm

CALIFORNIA Suggestion 65

  1. Combustible by-products produced when using this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive impairment.
  2. This product contains chemicals, including lead and lead compounds, known to the Land of California to cause cancer, nativity defects or other reproductive harm.

Wash your hands after handling this product

CAUTION

If grill should go out accidentally, turn the burner control O OFF, wait v minutes and echo the lighting  procedure.

Grease Fires

  • Putting out grease fires by endmost the hat is not possible. Grills are well ventilated for prophylactic reasons.
  • Do not employ water on a grease fire. Personal injury may upshot. If a grease fire develops, plough knobs and LP tank off.
  •  If grill has not been regularly cleaned, a grease burn down tin can occur that may damage the product. Pay close attention while preheating or burning off nutrient residue to insure that a grease burn does not develop. Follow instructions on Full general Grill Cleaning and Cleaning The Burner Associates to foreclose grease fires.
  • The best manner to foreclose grease fires is regular cleaning of the grill.

Food Safety

Nutrient safety is a very important part of enjoying the outdoor cooking experience. To keep nutrient safety from harmful leaner, follow these 4 basic steps:
Clean: Wash hands, utensils, and surfaces with hot soapy h2o before and after handling raw meat and poultry.
Separate: Separate raw meats and poultry from prepare-to-eat foods to avert cantankerous contamination. Use a clean platter and utensils when removing cooked foods.
Cook: Cook meat and poultry thoroughly to kill bacteria. Utilise a thermometer to ensure proper internal food temperatures.
Chill: Refrigerate prepared foods and leftovers promptly.

For more than information call: USDA Meat and Poultry Hotline at 1-800-535-4555 In Washington, DC (202) 720-3333, ten:00 am- 4:00 pm EST.

Grease Tray

Never use drippings straight from the grease tray to make gravy. Apply the included foil tray liner to catch drippings, then reheat the drippings to kill leaner. Replacement foil tray liners and other accessories tin be found at world wide web.charbroil.com.

How To Tell If Meat Is Cooked Thoroughly

  • Meat and poultry cooked in the apparatus frequently browns very fast on the exterior. Use merely thawed meat and a meat thermometer to be sure food has reached a safety internal temperature, and cut into nutrient to check for visual signs of doneness.
  • We recommend food to exist at least 40°F before cooking in your appliance.
  • Whole poultry should reach 165° F. Juices should run articulate and mankind should non be pink.
  • Beef, veal and lamb steaks, roasts and pork chops can be cooked to 145° F.
  • NEVER partially cook meat or poultry and finish cooking later on. Cook nutrient completely to destroy harmful bacteria.
  • Use a meat thermometer to ensure proper internal food temperatures.

DANGER

  • NEVER store a spare LP cylinder under or near the appliance or in an enclosed area.
  • Never make full a cylinder beyond 80% full.
  • An over filled or improperly stored cylinder is a take chances due to possible gas release from the safety relief valve. This could cause an intense burn with risk of property impairment, serious injury or death.
  • If you see, smell or hear gas escaping, immediately get away from the LP cylinder/apparatus and call your burn down department.
  • Keep LP tank at a minimum distance of 24" (inches) away from apparatus at all times.

LP tank at a minimum distance

LP Cylinder Removal, Transport and Storage

  •  Turn OFF the command knob and LP cylinder valve. Turn coupling nut counterclockwise by hand only – practise not use tools to disconnect. Install condom cap onto LP cylinder valve. E'er apply cap and strap supplied with valve. Failure to use safe cap as directed may issue in serious personal injury and/or property damage.

LP (Liquefied Petroleum Gas)

  • LP gas is nontoxic, odorless and colorless when produced. For Your Safety, LP gas has been given an odor (similar to rotten cabbage) so that information technology tin be smelled.
  • LP gas is highly combustible and may ignite unexpectedly when mixed with air.
  • A asunder LP cylinder in storage or being transported must have a safety cap installed (as shown). Practise not store an LP cylinder in enclosed spaces such as a carport, garage, porch, covered patio or other building. Never leave an LP cylinder inside a vehicle which may become overheated past the sun.
  • Exercise not store an LP cylinder in an surface area where children play.

LP Cylinder Valve

LP Cylinder

  • The LP cylinder used with your appliance must meet the  following requirements:
  • Use LP cylinders only with these required measurements: 12″ (30.5cm) (bore) x 18″ (45.seven cm) (tall) with 20 lb. (9 kg.) chapters maximum.
  • LP cylinders must be synthetic and marked in accordance with specifications for LP cylinders of the U.S. Section of Transportation (DOT) or the National Standard of Canada, Can/CSA-339, Cylinders, Spheres and Tubes for  Transportation of Unsafe Goods; and commission, as applicative. Meet LP cylinder collar for mark.
  • LP cylinder valve must have: OPD Hand Wheel
    Type i outlet uniform with regulator or appliance.
    Condom relief valve.
    UL listed Overfill Protection Device (OPD). This OPD safety feature is identified by a unique triangular manus cycle. Employ but LP cylinders equipped with this type of valve.
  • LP cylinder must be bundled for vapor withdrawal and include collar to protect LP cylinder valve. Ever go along LP cylinders in upright position during use, transit or storage.

LP Cylinder Filling

  • Use just licensed and experienced dealers.
  • LP dealer must purge new cylinder before filling.
  • Dealer should NEVER fill LP cylinder more than 80% of LP cylinder volume. Volume of propane in cylinder will vary by temperature.
  • A frosty regulator indicates gas overfill. Immediately close LP cylinder valve and call local LP gas dealer for assistance.
  • Practice not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice.
  • To remove gas from LP cylinder, contact an LP dealer or call a local fire department for assistance. Check the phone directory under "Gas Companies" for nearest certified LP dealers.

LP Cylinder Exchange

  • Many retailers that sell this appliance offering y'all the selection of replacing your empty LP cylinder through an exchange service. Utilise simply those reputable exchange companies that audit, precision make full, test and certify their cylinders. Exchange your cylinder only for an OPD condom characteristic-equipped cylinder  every bit described in the "LP Cylinder" section of this manual.
  • Always keep new and exchanged LP cylinders in upright position during use, transit or storage.
  • Leak test new and exchanged LP cylinders Before connecting to the appliance.

LP Cylinder Leak Test

For your condom

  • Leak test must be repeated each fourth dimension LP cylinder is exchanged or refilled.
  • Exercise not fume during leak test.
  • Do not utilize an open up flame to check for gas leaks.
  • This appliance must be leak tested outdoors in a well-ventilated surface area, away from ignition sources such as gas fired or electrical appliances. During leak exam, keep appliance away from open flames or sparks.
  • Use a clean paintbrush and a 50/l mild soap and water solution. Brush soapy solution onto areas indicated past arrows in effigy beneath.
  • Do non use household cleaning agents. Damage to gas railroad train components can outcome.

LP Cylinder Leak Test

Alarm

If "growing" bubbles appear exercise not use or move the LP cylinder. Contact an LP gas supplier or your burn down department!

Connecting Regulator to the LP Cylinder

  1. LP cylinder must be properly secured onto appliance. (Refer to assembly section.)
  2. Turn all command knobs to the OFF position.
  3. Turn LP cylinder OFF past turning manus-wheel clockwise to a full stop.
  4. Remove the protective cap from LP cylinder valve. Always use cap and strap supplied with valve.

Connecting Regulator

Do not use a Politician transport plug (plastic part with external threads)! Information technology will defeat the safety feature of the valve.

Do not use a POL transport plug

5. Hold regulator and insert nipple into LP cylinder valve. Hand-tighten the coupling nut, property regulator in a direct line with LP cylinder valve then as not to cross-thread the connection.

Hold regulator

Hold coupling

half dozen. Turn the coupling nut clockwise and tighten to a full end. The regulator will seal on the back-check feature in the LP cylinder valve, resulting in some resistance. An additional one-half to three-quarters turn is required to complete the connection. Tighten by mitt merely – practise not use tools.

Note:
If you cannot consummate the connection, disconnect regulator and repeat steps 5 and 6. If you are even so unable to complete the connection, do not use this regulator!

DANGER
Do non insert any tool or foreign object into the valve outlet or safety relief valve. You may damage the valve and cause a leak. Leaking propane may issue in explosion, fire, severe personal injury, or death.

Alarm

  • This appliance is not intended to be installed in or on a boat.
  •  This appliance is not intended to be installed in or on an RV.
  •  Never attempt to attach this apparatus to the self independent LP gas organisation of a camper trailer or motor domicile.
  •  Do not utilize this appliance until leak-tested.
  •  If a leak is detected at any time, STOP and phone call the fire section.
  •  If you cannot stop a gas leak, immediately close LP cylinder valve and call LP gas supplier or your fire department!

Leak Testing Valves, Hose and Regulator

  1. Plow command knob to OFF.
  2. Be sure regulator is tightly connected to LP cylinder.
  3. Completely open up LP cylinder valve past turning hand wheel counterclockwise. If you lot hear a rushing sound, turn gas off immediately. At that place is a major leak at the connexion. Correct before proceeding.
  4. Brush soapy solution onto areas circled below.

Brush soapy solution onto areas circled

open LP cylinder valve

5. If "growing" bubbles appear, in that location is a leak. Close LP cylinder valve immediately and retighten connections. If leaks cannot be stopped do not endeavor to repair. Call for replacement parts. Guild new parts by giving the serial, model number and name and part number of items needed (see parts listing) to the Grill Service Center at the number listed on front comprehend.
6. Always shut LP cylinder valve later on performing leak examination by turning hand bicycle clockwise.

WARNING

For Safe Use of Your apparatus and to Avert Serious Injury:

  • The apply of alcohol, prescription or non-prescription drugs may impair the consumer's ability to properly gather or safely operate the appliance.
  •  When cooking, the apparatus must exist on a level, stable noncombustible surface in an surface area clear of combustible material. An asphalt surface (blacktop) may not exist acceptable for this purpose.
  • Do not get out appliance unattended. Keep children and pets away from the appliance at all times.
  • Do not place empty cooking vessel on the appliance while in functioning. Use caution when placing anything in cooking vessel while the appliance is in operation.
  • Do not move the apparatus when in employ. Allow the cooking vessel to absurd to 115°F (45°C) before moving or storing.
  • This apparatus is not intended for and should never be used as a heater.
  • This appliance will exist hot during and subsequently apply. Use insulated oven mitts or gloves and long-handled charcoal-broil utensils for protection from hot surfaces or splatter from cooking liquids.
  • Keep appliance area clear and free from materials that burn.
  • Proceed appliance area clear and costless from combustible materials, gasoline and other combustible vapors and liquids.
  • Go on fuel supply hose away from whatsoever heated surfaces.
  • Use appliance only in well-ventilated infinite. NEVER apply in enclosed space such as carport, garage, porch, covered patio, or under an overhead construction of any kind.
  • Use appliance at least 3 ft. from whatever wall or surface. Maintain 10 ft. clearance to objects that tin grab fire or sources of ignition such equally pilot lights on water heaters, live electrical appliances, etc.

Use appliance

Ignitor Lighting

• Do not lean over apparatus while lighting.

  1. Turn ON LP gas cylinder.
  2. Press and turn the control knob to
  3.  Turn ROTARY IGNITOR knob rapidly.
  4.  If ignition does not occur in 5 seconds, plough the burner control knob O OFF, wait 5 minutes, and repeat lighting process.

If ignition still does not occur, follow match-lighting instructions.

WARNING
Turn control knob and LP cylinder OFF when not in utilize.

CAUTION
If ignition does Not occur in 5 seconds, turn the control knob OFF, wait 5 minutes and echo the lighting process. If the burner does non ignite with the valve open, gas will keep to flow out of the burner and could accidently ignite with risk of injury.

Lucifer-Lighting
Practise non lean over appliance while lighting.

  1. Turn ON LP cylinder.
  2. Swing friction match hole plate to expose match lighting hole. Place lit match into match lighting hole of appliance as pictured below. Make certain lit match is placed inside hole and near burner.
  3. Push in and turn control knob to Be sure burner lights and stays lit.
  4. One time lit, swing lucifer hole plate back to comprehend up lucifer lighting hole. Circumspection: Plate maybe hot.
Match-Lighting
View is from side of appliance

Burner Flame Check

  • Light burner. Looking through viewing hole on peak of appliance, yous should meet the flame height as shown below. Turn control knob from to OFF. The Flame summit should decrease and then exit. Ever check flame prior to each employ. If only low flame is seen refer to "Sudden drop or low flame" in the Troubleshooting Section.

Burner Flame Check

Ignitor Check
• Turn gas off at LP cylinder. Turn ignitor knob. "Click" should be heard each time at electrode. Run across "Troubleshooting" if no click or spark.

Valve Bank check
Of import: Make sure gas is off at LP cylinder before checking valve. Knob locks in OFF position. To check valve, first push in knob and release, knob should bound back. If knob does non spring back, replace valve assembly before using this appliance. Plow knob to position then plough back to OFF position. Valve should turn smoothly.

Hose Check
• Earlier each use, check to see if hose is cutting, worn or kinked. Supercede damaged hose earlier using apparatus. Apply only valve/hose/regulator specified by manufacturer.

Hose Check

General Appliance Cleaning

  • Meat Thermometer: Practise not immerse or soak in h2o. Wash with warm soapy water and wipe dry.
  • Exercise not mistake brown or black accumulationorth of grease and fume for paint. Interiors are not painted at the mill (and should never exist painted). Apply a strong solution of detergent and h2o or use a grill cleaner with scrub brush on insides of appliance chapeau and bottom. Rinse and allow to completely air dry out. Practice not apply a caustic grill/oven cleaner to painted surfaces. A blackness surface improves the appliances performance.
  • Plastic parts: Wash with warm soapy water and wipe dry. Exercise non use citrisol, abrasive cleaners, degreasers or a full-bodied grill cleaner on plastic parts. Damage to and failure of parts tin can upshot.
  • Painted surfaces: Wash with mild detergent or not-abrasive cleaner and warm soapy water. Wipe dry with a soft nonabrasive cloth.
  •  Stainless steel surfaces: To maintain the high quality appearance, wash with balmy detergent and warm soapy h2o and wipe dry with a soft cloth after each employ. Broiled-on grease deposits may crave the use of an annoying plastic cleaning pad. Apply but in management of brushed terminate to avoid damage. Do not apply annoying pad on areas with graphics.

CAUTION

SPIDER ALERT

If your appliance is getting hard to light or the flame is weak, check and clean the venturi'south and burners.

Spiders or small insects are know to create "flashback" problems past building nests and laying eggs in the appliance venturi or burner obstructing the flow of gas. The back-upwardly gas tin ignite behind the command panel. This flashback can damage your apparatus and crusade injury. To prevent flashbacks and ensure good performance the burner and venturi tube assembly should be removed and  cleaned when ever the appliance has been idle for an extended menstruum of fourth dimension.

vii. Make clean inner burner as recommended below, shown E. Nosotros suggest three ways to clean the burner tube. Employ the ane easiest for you.
(A) Curve a potent wire (a light weight coat hanger works well) into a pocket-sized claw. Run hook through burner tube several times.

Cleaning the Burner Assembly

(B) Use a narrow canteen brush with a flexible handle (do not use a brass wire brush), run the brush through burner tube several times.
(C) Habiliment center protection: Use an air hose to force air into the burner tube and out the burner ports. Cheque each port to make certain air comes out each hole.
8. Check burner for damage, due to normal wear and corrosion some holes may get enlarged. If whatever large cracks or holes are found supersede burner.
ix. Adhere electrode to burner.
10. Advisedly replace control panel associates .
VERY Of import: Burner tube must re-engage over valve opening. See illustration, shown F.
11. Reposition inner liner, cooking basket and tiptop embrace.

Cleaning the Burner Assembly

LIMITED WARRANTY

This warranty only applies to units purchased from an authorized retailer. Manufacturer warrants to the original consumer-purchaser but that this product shall be costless from defects in workmanship and materials after correct assembly and under normal and reasonable home employ for the periods indicated below commencement on the appointment of purchase*. The manufacturer reserves the correct to crave that defective parts be returned, postage stamp and or freight pre-paid by the consumer for review and examination.

LIMITED WARRANTY

*Notation: A dated sales receipt WILL be required for warranty service.

The original consumer-purchaser volition be responsible for all shipping charges for parts replaced nether the terms of this limited warranty.

This express warranty is applicative in the United States and Canada only, is but available to the original owner of the production and is not transferable.

Manufacturer requires proof of your appointment of buy. Therefore, you should retain your sales slip or invoice. Registering your product is not a substitute for proof of purchase and the manufacturer is not responsible for or required to retain proof of purchase records.

This limited warranty applies to the functionality of the production ONLY and does not cover cosmetic issues such as scratches, dents, corrosions or  discoloring by heat, abrasive and chemical cleaners or whatever tools used in the assembly or installation of the appliance, surface rust, or the discoloration of stainless steel surfaces.

This express warranty will non reimburse you for the price of whatsoever inconvenience, nutrient, personal injury or property harm.

ITEMS MANUFACTURER Will Non PAY FOR:

  1. Aircraft price, standard or expedited, for warranty and replacement parts
  2. Service calls to your home.
  3. Repairs when your production is used for other than normal, single-family household or residential utilize. acts of God, improper installation or maintenance, installation non in accordance with electrical or plumbing codes, or use of products not approved by the manufacturer.
  4. Harm, failures, or operating difficulties resulting from blow, alteration, careless treatment, misuse, abuse, fire, flood acts of God, improper installation or maintenance, installation not in accordance with electrical or plumbing codes, or utilize
    of products not approved by the manufacturer.
  5. Whatever food loss due to product failures or operating difficulties.
  6. Replacement parts or repair labor costs for units operated exterior the Us or Canada.
  7. Pickup and delivery of your product.
  8. Repairs to parts or systems resulting from unauthorized modifications made to the product.
  9. The removal and/or reinstallation of your product.

DISCLAIMER OF Unsaid WARRANTIES and LIMITATION OF REMEDIES

Repair or replacement of defective parts is your exclusive remedy under the terms of this express warranty. In the outcome of parts availability problems, the manufacturer reserves the right to substitute like or similar parts that are every bit functional.

Manufacturer will not exist responsible for any consequential or incidental amercement arising from the breach of either this limited warranty or any applicative unsaid warranty, or for failure or harm resulting from acts of God, improper care and maintenance, grease burn, accident, alteration, replacement of parts by anyone other than Manufacturer, misuse, transportation, commercial apply, corruption, hostile environments (inclement atmospheric condition, acts of nature, fauna tampering), improper installation or installation not in accord with local codes or printed manufacturer instructions.

THIS Express WARRANTY IS THE SOLE EXPRESS WARRANTY GIVEN BY THE MANUFACTURER. NO Production Functioning SPECIFICATION OR DESCRIPTION WHEREVER Appearing IS WARRANTED By MANUFACTURER EXCEPT TO THE EXTENT Ready Forth IN THIS LIMITED WARRANTY. Whatsoever Implied WARRANTY PROTECTION ARISING UNDER THE LAWS OF ANY State, INCLUDING IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE, IS HEREBY Express IN Duration TO THE Duration OF THIS Express WARRANTY.

Neither dealers nor the retail institution selling this product has any authority to make whatsoever additional warranties or to hope remedies in addition to or inconsistent with those stated above. Manufacturer's maximum liability, in any event, shall non exceed the purchase cost of the production paid past the original consumer.

Notation: Some states practise not let an exclusion or limitation of incidental or consequential damages, and so some of the above limitations or exclusions may not employ to you. This limited warranty gives y'all specific legal rights as set forth herein. You may besides have other rights which vary from country to country. In the state of California but, if refinishing or replacement of the product is not commercially practicable, the retailer selling this product or the Manufacturer will refund the purchase price paid for the product, less the amount direct owing to use by the original consumer-purchaser prior to discovery of the nonconformity. In addition, in the state of California only, you may take the product to the retail institution selling this product in gild to obtain performance nether this limited warranty.

If you wish to obtain performance of whatever obligation under this limited warranty, you should
write to:
Consumer Relations
P. O. Box 1240
Columbus, GA 31902-1240

Consumer returns volition not be accepted unless a valid Return Potency is first acquired. Authorized returns are clearly marked on the outside of the package with an RA number and the package is shipped freight/postage pre-paid. Consumer returns that exercise not run across these standards will be refused.

ASSEMBLY

ASSEMBLY

ASSEMBLY

ASSEMBLY

ASSEMBLY

Annotation: Before cooking on your appliance for the get-go time, refer to the Outdoor Cooking Guide on how to prepare the appliance for cooking. It is recommended that yous flavour your appliance prior to cooking.

wind conditions

  • When cooking hang peak cover on handle as shown.
  • Once seasoning is consummate, the appliance is now prepare for use. The cooking pot will continue to darken with use. This volition inhibit rusting forth with improving the performance of the infrared cooking pot.
  • Use of mesh top encompass is optional. Heat will reflect off of the peak cover and provide boosted browning to the top of your meat. Exist careful – the superlative encompass tin cause the heat to reverberate too much, so as to fire the top of your meat. The meridian cover helps when cooking in temperatures below forty˚F or in high-current of air conditions.

wind conditions

EMERGENCIES

If a gas leak cannot exist stopped, or a fire occurs due to gas leakage, call the burn down department.

EMERGENCIES

Troubleshooting

Troubleshooting

Read More than About this Manual….

Char-Broil-The-Big-Piece of cake-Oil-less-Turkey-Fryer-Transmission-Optimized

Char-Broil-The-Big-Easy-Oil-less-Turkey-Fryer-Manual-Original

Model 08101480 [pdf manual]: 130812-8

Questions about your Manual? Post in the comments!

bashiradmiand.blogspot.com

Source: https://manuals.plus/char-broil/char-broil-the-big-easy-oil-less-turkey-fryer-instruction-manual

0 Response to "Char Broil Big Easy Turkey Fryer Instructions"

Postar um comentário

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel